How Do I Connect My Wifi To My Laptop

Reset Your Wifi Adapter

How to connect your Laptop to Wifi

More often, some technical issues are likely to occur within your PC, which may prevent your computer from connecting successfully to Wireless networks.

FIX: A simpler approach to resetting a PCs WiFi adapter is by rebooting the deviceBesides restarting the device, you can cycle the WiFi adapter by allowing it to fall into Airplane mode for a while.

Check for the WiFi icon on the system tray and click Check your network settings to trigger Flight mode. Give some time before disabling the mode.

Restart Your Equipment And Laptop

Lets start with the elementary troubleshooting steps. Restarting your router, modem, and laptop itself should always be a priority.

The IP conflict isnt uncommon, especially if you use more than a few devices for accessing the internet via a single router. Two of them get the same IP assigned and then the issues start.

In addition, theres always the possibility of a stall within the system, so restarting laptop is highly recommended, as well.

Restarting your equipment will clear up the possible stall. Firstly, try using the LAN, wired connection. If the problem concerns only Wi-Fi connection, restart your modem and router.

Power them off and wait for some time before turning them on again. Also, it might sound silly, but dont forget about the physical switch or the function button .

If you disabled Wi-Fi by accident, make sure to re-enable it accordingly.

Joining An Existing Wireless Network

If you want to network two computers wirelessly, the easiest method is to use an existing wireless network to make the connection.

While other methods listed below will allow you to make a connection, they wont offer you the reliability that an established network will. A network with a dedicated wireless router will offer the best speeds and WiFi range, as well as potential internet access and access to other devices on a network .

Once two devices are joined to an existing network, its a straightforward process to share files, play local games, and do much more.

Also Check: Msi Laptop Change Keyboard Color

How Do I Use My Iphone As A Hotspot For My Computer Via Usb

USB tethering From the Home screen, tap Settings > Personal Hotspot. If you dont see Personal Hotspot, tap Carrier and you will see it. Tap the switch next to Personal Hotspot to turn on. Connect your device to the computer using the USB cable. The device will automatically begin tethering after syncing is complete.

How To Fix Laptop Not Connecting To Wi

Why Does My Laptop Keep Disconnecting From WIFI?

This issue applies to laptops running Windows, Mac, or Linux. These fixes may also work for other devices like smartphones or tablets.

Does your laptop not connect to Wi-Fi when other devices will? If this is the case, you can step the first step below. You should only restart your modem and router if no device can connect to the network. Otherwise, you’ll need to troubleshoot the laptop itself.

Restart your modem and router. When left running for long periods, a modem and router can fail and either drop its internet connection or drop the Wi-Fi network. A reset will often repair this issue. If all your devices still can’t connect to Wi-Fi, you may need to do a hard reset of your router or reconfigure your router.

Ensure Wi-Fi is turned on. If your laptop has a hardware switch to control Wi-Fi, make sure this is on.

Also Check: Best Laptop For Accountants 2021

Modify Network Adapter Settings

Change channel width for your network adapter

Press

Locate your wireless adapter and right-click it. Choose Properties from the menu.

Click the Configure button.

Select the 802.11d from the Property list and set the value to Enabled.

Click OK to save the changes.

Update your network adapter drivermanually

Press theX, and choose Device Manager from the list.

Under the Network adapters dropd-won, find the wireless network adapter in the list .

Right-click it and choose Update Driver Software.

Click Browse my computer for driver software.

Now click on Let me pick from a list of device drivers on my computer.

Make sure that Show compatible hardware is not checked.

Find your network adapter manufacturer and select the driver you wish to install.

After youve installed the driver, restart your computer.

Did you know that you can update drivers automatically? Updating drivers manually can be tedious and a bit hard to follow, but theres a way to automate this process.

By using specialized driver updater software like DriverFix you can automatically update all drivers on your PC with just a few clicks.

Make sure that your adapter and router are using the same security type

In order to protect your data, wireless connections come with certain security types such as WPA2-PSK or WPA-PSK .

For your network connection to work properly, your router and computer need to use the same security type.

To do that, you need to follow these steps:

Choose Network and Sharing Center.

Having The Wrong Date And Time

Having an incorrect date and time can also result in WiFi connectivity issues, especially if your connection features installed firewall hardware.

Similarly, your computer experiences this problem if your network uses any firewall software. As a result, it is best to ensure that you set your computer to the correct date and time so that your network can identify it successfully.

FIX: Changing the time and date is a seamless process that doesnt require any tech savviness and shouldnt eat much into your time.

To view this video please enable JavaScript, and consider upgrading to a web browser thatsupports HTML5 video

Just check for the Windows default clock on the taskbar and select the option that allows you to adjust the time and date. Afterward, change the reading to the correct time using your phone or watch for accuracy.

Don’t Miss: How To Display 3 Screens With Laptop

Can A Pc Connect To Wi

Ethernet is a wired connection, so if you want to connect to a wireless Wi-Fi network, you don’t need Ethernet at all.

The best way to connect to your Wi-Fi network is by using a Wi-Fi adapter. Some desktop PCs and most laptops have them built-in, but there are add-in ones you can buy. They are relatively affordable and offer the best speeds without being limited by battery life. Alternatively, you can use a smartphone and USB tether it as in the instructions above, but you’ll need the correct USB cable, and you won’t be able to unplug your smartphone if you want to retain that Wi-Fi connection on your PC.

Solved: Windows 10 Wont Connect To Wifi

How To Fix a Laptop That Won’t Connect to Wifi!!

Having trouble with your Windows 10 computer or laptop not connecting to WiFi?

Its frustrating to not be able to connect to the internet, and unfortunately the Windows Network Troubleshooter doesnt always identify the problem for you.

Not being able to connect to the WiFi is a common issue with Windows 10 computers, especially after an update is released, but weve found that usually you can resolve the problem and get back online with one of following the steps outlined below.

First, make sure the issue is with your computer and not your router or modem. Are you able to connect to your WiFi with another device, like a phone or a different computer?

If not, you may need to address the problem with your router or internet provider. If you are able to connect with a different device, try these steps to resolve the issue and connect your computer to the WiFi again.

How Do I Connect My Old Desktop To Wi

If you have an older laptop with an Ethernet connection, there is another method you can use for connecting your desktop PC to Wi-Fi: Internet Sharing. You’ll need to connect your laptop to your chosen Wi-Fi connection, then connect it to your desktop PC using an Ethernet cable.

When ready, follow these steps on how to share your internet connection.

How Do I Enable And Disable Wi

Laptops today all have Wi-Fi built-in, allowing people to connect to the Internet from almost anywhere. For security reasons, compatibility, or other reasons, you may want to enable and disable the Wi-Fi on your laptop.

If your Wi-Fi is not working or the suggested buttons do not work, for troubleshooting steps, see: Why is my Wi-Fi not working?

Renew The Ip And Flush The Dns

In the Windows Search bar, type cmd, right-click Command prompt, and run it as an administrator.

In the command line, type the following commands and press Enter after each: ipconfig /releaseipconfig /renew

Wait for some time and then type in this command and press Enter: ipconfig /flushdns

Close Command Prompt and try connecting to Wi-Fi again.

If IP is conflicting with one of the other connected devices, you can always restart it and move from there.

However, the special focus is on the DNS cache that collects your domain data and can affect negatively the connection.

DNS is there to translate the hostname to IP and IP to hostname. All collected translations are stored in DNS cache and the piling up can break the connection occasionally.

Fortunately, you can reset DNS and renew IP and move from there, as described above.

Disable With Laptop Wi

How to know a wifi password if my laptop is connected to it

Some laptops have an On/Off button or switch for the Wi-Fi device, like the button shown in the picture. It is usually found on the front of the laptop or above the keyboard. Find the button or switch and make sure it is disabled. When disabled, the button should not be illuminated or illuminated as orange or red, or the switch should be in the Off position.

Recommended Reading: How To Screen Record On Dell Desktop

How To Connect Pc Internet To Mobile Via Wifi

This article was co-authored by Spike Baron and by wikiHow staff writer, Jack Lloyd. Spike Baron is the Owner of Spike’s Computer Repair based in Los Angeles, California. With over 25 years of working experience in the tech industry, Spike specializes in PC and Mac computer repair, used computer sales, virus removal, data recovery, and hardware and software upgrades. He has his CompTIA A+ certification for computer service technicians and is a Microsoft Certified Solutions Expert.The wikiHow Tech Team also followed the article’s instructions and verified that they work. This article has been viewed 713,327 times.

This wikiHow teaches you how to broadcast your Windows computer’s Wi-Fi connection to your smartphone. You can do this on any computer that has a network hosting-enabled Wi-Fi adapter installed, meaning that you won’t be able to use many desktop computers for this process. Keep in mind that this process is different than using your smartphone’s data as a Wi-Fi network on your computer. If your computer’s Wi-Fi adapter doesn’t allow you to create a hotspot, you can use Connectify to broadcast your Wi-Fi.

How Do You Connect A Desktop Computer To Wi

Most desktop computers come with a built-in Ethernet port for connecting to your local network and the internet via an Ethernet cable, but not all with Wi-Fi connectivity pre-installed. You can use a Wi-Fi adapter, of course, but you can also connect a desktop to Wi-Fi without an adapter.

The easiest way to do it is using your smartphone’s built-in USB Tethering.

For our screenshots below, we’ll use Android, but we’ll include the steps needed for an iPhone.

Make sure your PC and smartphone are running the latest versions of their respective operating systems.

Ensure your smartphone is connected to your chosen Wi-Fi network.

Connect your smartphone to your PC via a USB cable. It may be Micro-USB or USB-C if you’re using an Android device or a lightning cable if it’s an iPhone. If your smartphone asks, give the PC permission to access it.

Open your phone’s Settings menu.

On Android, navigate to Network and Internet > Hotspot & Tethering and toggle on Tethering. On iPhone, navigate to Cellular > Personal Hotspot and toggle on Personal Hotspot.

Your PC should have connected to your local Wi-Fi network via your smartphone. You can confirm its active network connection by selecting the Taskbar Icon arrow in the bottom right of your screen, then select the network icon. It will appear as a rectangular screennot a Wi-Fi symbol, as the computer is technically connected to Wi-Fi over a wire).

Recommended Reading: How To Free Up Storage On Hp Laptop

Check The Wifi Channel

In most cases, your home network may fail to show up because of your WiFi channel. Since each wireless network uses a unique channel to broadcast itself, your device may not detect your home network if multiple WiFi networks surround you.

Changing your WiFi channel can help fix this issue. To do this, visit your router login page and select another channel in the WiFi settings.

However, ensure that you do not select a channel that another network has occupied. Ensure that you set your channel to a specific one and not to Auto.

Using a WiFi analyzer software can help you determine the best channel to occupy.

How To Set Up Wi

How to Connect WiFi in Laptop

By: Talon Homer | Updated: Oct 7, 2021

You can connect your PC or laptop to the internet through a Wi-Fi connection if you have a wireless router connected to broadband internet and an operating system that fully supports wireless networking, such as Windows 8, 10 or 11.

If your wireless router was professionally installed by an internet service provider, chances are it’s already been set up with an SSID and password encryption. In such a case, you can most likely skip straight to the final step. If you’re installing it yourself, you can proceed with the guide as normal. Here’s what to do:

Power up the wireless router and use an ethernet cable to connect to one of the network ports on your internet service provider’s modem.

Open the network setup wizard in Windows. Depending on the version of your OS, this process varies:

In Windows 7 or Windows 8.1, select Start, start typing Network and Sharing Center, and then choose it in the list.
In Windows 10, select Start, then select Settings/Network & Internet/Status/Network and Sharing Center.
In Windows 11, select Start, type Control Panel, then select Control Panel/Network and Internet/ Network and Sharing Center.

Once the wizard is accessed:

Select: Set up a new connection or network/Set up a network/Next.

Enter your username and password when prompted. Many routers use the term admin as a default for both. Again, check your router’s manual if you don’t know the default username and password.

How Can I Connect To My Friends Laptop

When you press enter, you go to the start> run> type conf> press enter.

It will be possible to use Microsoft Windows Netmeeting.

There is a registration system for each of you.

Verify your friends IP address via an e-mail.

To place the order, click on the place call button.

A message will appear telling your friend not to call you.

Be sure to ask your friend to give the call their approval.

You now have your two computers connected.

Cause Of Laptop Not Connecting To Wi

There are many potential causes when a laptop won’t connect to Wi-Fi. The most common one relates to correctly authenticating with the target network.

Other possible causes include faulty Wi-Fi network configuration, a malfunctioning modem or router, corrupt or failing network hardware or drivers, or antivirus software or firewall blocking your connection.

You May Like: How To Screen Record On Hp Computer

Try Disabling Your Firewall

Your firewall is designed to prevent unauthorized access to your computer, but sometimes it can conflict with your Wi-Fi network. Try disabling the Windows firewall to see whether the Wi-Fi works with it turned off. If you have more than one firewall installed, open the management software for the other firewall and turn it off there.

Press Windows key + X.

Connecting Two Computers Wirelessly Using Bluetooth

Go Wireless and Never Connect a Cable to Your iPhone Again

While a WiFi network is a great way to connect two computers wirelessly, an alternative is to use Bluetooth to create a connection. While the available range and speeds require both devices to be nearby, Bluetooth has been designed with short-term connections in mind.

To connect two devices wirelessly using Bluetooth, youll need to make sure that both devices have Bluetooth connectivity. Many modern laptops and PCs come with Bluetooth built-in, but you can use an external USB Bluetooth adapter to make a connection if its missing.

To start, make sure that Bluetooth is turned on on the devices youre looking to connect. You can do this on Windows 10 by selecting the action center icon in the bottom-right corner of the taskbar, then selecting the Bluetooth card to the On position.

Next, open the Settings menu by right-clicking the Start menu and selecting the Settings option.

In the Settings menu, go to the Devices > Bluetooth & other devices menu, then select the Add Bluetooth or other device button.

In the Add a device window, select the Bluetooth option.

A list of nearby Bluetooth devices will appear in the next menu. Select the other computer you wish to connect with to begin to establish a connection. You may need to authenticate by typing in a PIN code that will be displayed on both screens.

Don’t Miss: How To Factory Reset Hp 15 Laptop

Fix : Update Your Laptop Network Driver

Updating drivers should always be your go-to option when something goes wrong with your computer or system. Whether you choose to update the device drivers manually, using Windows Update, or you use a trusted third party product, its essential that you have the latest correct device drivers for your operating system at all times.If youre not comfortable playing with device drivers, or if your computer cant access the Internet, we recommend using Driver Easy. Its a tool that detects, downloads and installs any driver updates your computer needs.To update your drivers with Driver Easy, just click the Scan Now button, then when it lists the drivers you need to update, click Update. The correct drivers will be downloaded, and you can install them either manually through Windows or all automatically with Driver Easy Pro.

Driver Easy is also able to help you update your network driver when youre offline. You can use the Offline Scan feature to do so.