Thursday, June 16, 2022

How To Restore Laptop To Factory Settings

Don't Miss

Choose To Keep Your Files Or Remove Everything

How to Restore Your Computer to Factory Settings [Tutorial]

You will need to make an important decision here:

  • Keep my files or Remove everything

If you plan to continue using this laptop, it may be wise to keep those files. On the other hand, youll likely purge everything if the machine is leaving your possession.

If so, make sure youve backed up anything you want to keep .

Whichever selection you choose, follow the prompts and give Windows the details needed to finish the process.

How Long Does It Take To Perform The Factory Reset

But how long does a factory reset take on a laptop? Well, unfortunately, this is more of a wildcard question. There isnt a single answer to that. The entire process of factory resetting your laptoptake as little as 30 minutes up to 3 hours depending on what OS you have installed, your processor speed, RAM and whether you have an HDD or an SSD hard drive. In some rare cases, it may even take up your entire day. The same goes for using the recovery partition, the timing varies from computer to computer. If you instead perform a clean reinstallation using a previously created installation disk, the whole thing can usually be done in as little as 20 minutes on a fast machine. In this process, everything gets wiped out, including the bloatware installed by the manufacturer.

If your device no longer boots, a Linux CD can be helpful. Unfortunately, installed programs cannot be saved this way. You will have to reinstall these manually after restoring the factory settings. Keep your windows activation key handy since you will need it after a fresh install.

Prevention Is Better Than Cure

After reading so much information, you know it is annoying to remove viruses or malware from your device. Sometimes although you run a factory reset, viruses may not be removed eventually if you encounter stubborn viruses like xHelper. Or you have removed viruses from your devices after trying the above methods.

To protect your device against viruses or malware again, you had better take action. Prevention is better than cure.

  • Always run an antivirus software on your Windows PC, Mac, or phone.
  • Use the latest system and apps.
  • Avoid installing programs from unknown and unverified sources.
  • Have a healthy browsing habit.
  • Dont use an unsafe Wi-Fi connection.
  • Keep your files safely backed up.
  • As for backup, we have mentioned it above.

    To back up Windows 10/8/7, download and install MiniTool ShadowMaker on your PC. Then, launch it to the Backup page, choose the backup source and destination. Then, run the backup by clicking Back up Now.

    This backup software allows you to create a system backup image, back up files, folders, disks, and partitions. You can use it to automatically back up your computer. If you have a need, just get it to have a try.

    To back up a Mac, you can follow the methods in this post – 5 Ways: How To Backup Your Mac To An External Hard Drive. To back up your phone, you can go to find the way on the Internet.

    Read Also: Acima Credit Laptop

    How To Restore Windows 7 To Factory Settings Without Disk

    Wondering how to restore Windows 7 computer to factory settings without disk to remove some issues that happened to your computer? Restoring Windows computer to factory settings is a dangerous behavior that will erase all of your important personal data and let your PC in an original configuration like the first purchase. So, to install a disk for your Windows system is so significant. However, what if there is no installation disk? No worries. There will be detailed tutorials guide you how to reset Windows 7 to factory settings without disk below.

    Running Startup Repair From Safe Mode

    Restore Reset HP Notebook or Laptop To Factory Defaults ...

    Another option using Safe Mode is Startup Repair. Although this option doesnt technically restore the PC to its default settings, it can solve many other issues commonly requiring a factory reset. To run Startup Repair:

    • Boot up the PC
    • Before the Windows logo comes onscreen, push F8 and hold it until the Advanced Boot Options menu appears .
    • Choose Repair Your Computer from the options and press Enter.
    • If required, enter the administrator password.
    • When the System Recovery Options menu pops up, choose Startup Repair, which should be the first option.
    • Follow the prompts and finish the restore!

    You May Like: How Do I Setup My Printer To My Laptop

    Automate The Task Of Keeping Drivers Current

    There is always an easier choice. Software, such as Driver Support, can automate the task of finding and installing drivers for you.

    Taking the guesswork out of the equation as well as the time needed for updating multiple devices can make it much easier to keep your laptop up to date.

    Try This Time-Saving Shortcut

    Clear Cache And Downloads

    Sometimes, you are redirected to some strange sites or you can see lots of pop-up ads. In this case, you should clear cache and downloads on your Android, iOS devices, PCs, or Macs. This related article – How to Clear Cache for One Site Chrome, Firefox, Edge, Safari shows you much information about this task.

    Don’t Miss: The Meaning Of Refurbished

    Cant Boot Into Windows

    If you cant boot into Windows, you may be able to perform a system restore in the Windows Recovery Environment. Heres how:

  • Boot your Surface using a USB recovery drive. Insert a bootable USB drive into the USB port on your Surface, then press and hold the volume-down button while you press and release the power button. When the Surface logo appears, release the volume-down button.

  • When asked if you want to continue, select Yes.

  • After running system restore, you should be able to boot into Windows.

    If You Intend To Keep Freshly Reset Msi Laptop

    How to restore ASUS laptop to factory settings

    Once the laptop is factory reset and configured, you can transfer back your data and programs from backup. And thats it: now you can go back to playing AAA games again!

    However, if you intend to resell the notebook, we suggest not proceeding with the setup after the system restore. Keeping it as it is will allow the new owner to configure the system how they like it.

    Also Check: How To Change Keyboard Color On Msi Laptop

    You May Have A Rootkit Malware

    A rootkit is a computer program, typically malicious, designed to offer continued privileged access to a computer while masking its existence and actions from users and other system processes. Today, it is usually associated with malware.

    Once a rootkit is installed on your device, hackers can control it and it is difficult to detect and remove the rootkit. To learn more information about rootkit, refer to this related article – The Definition, Types, Application & Removal Guide of Rootkit.

    Does Factory Resetting Your Computer Delete Everything

    No, it simply puts all applications back into their original state and removes anything that wasnt there when it was originally shipped to you. So, all apps, drivers, and programs that did not come with it will be removed, and your settings restored back to defaults. Your personal files may be kept intact or removed depending on the choice you made.

    A bunch of posts on this website that will help you reset other functions or software:

    Our portable freeware FixWin allows you to reset most of the following with a single click.

    Don’t Miss: How To Setup My Hp Printer To My Laptop

    How To Completely Restore System To Factory Defaults Acer

    Solution One: Acer Restore Factory Settings with Acer eRecovery Management

    Note: The following steps is based on Acer eRecovery Management Windows 7. If you are running other Windows operating systems, you can also refer to these steps for their recovery processes are similar.

    1. Get access to Acer eRecovery Management. If you can still boot into Windows, follow âStart â All Programs â Acer eRecovery Managementâ to open it. If not, press âAlt + F10â when power on the machine until it replies to your action. Then, you can access the recovery software.

    2. In the main window of Acer eRecovery Management, choose âRestoreâ â âCompletely Restore System to Factory Defaultsâ.

    3. Then, a window will pop up asking for continue or not. Select âYesâ and click âStartâ.

    4. A second confirmation about data overwritten. Click âOKâ to go on.

    5. The computer will restart and a notice screen will appears in your first sight. Please read it carefully and to continue click âNextâ.

    Note: If there are important data on the computer which you havenât move out or make a backup of them, do it know.

    6. The final confirmation will show up and just click âOKâ to start acer restore factory settings.

    7. It will show you the destination of acer restore to factory settings.

    8. It will show you the progress of acer restore factory default.

    Solution Two: Acer Restore Factory Settings with AOMEI OneKey Recovery

    Consider Updating Drivers For Improved Performance

    How to Reset Laptop to Factory settings on Windows 8 or ...

    You might have decided to do a factory reset because of your laptops performance. If you find that your mobile machine no longer seems to run as smoothly as it once had, there are other possibilities to consider.

    Windows was designed to run on a diverse number of computers and interface with all sorts of hardware.

    Every computer has devices, from your keyboard to a variety of Bluetooth devices . This hardware requires code to allow the software on your machine to talk to it. This code is the devices drivers.

    Over time, these device drivers will require updating. Otherwise, issues will manifest themselves in many different forms.

    Aside from trusting Windows to try and find the correct driver, you will want to either do it yourself or let professional software handle the task.

    Read Also: How To Hard Reset Hp Laptop Without Password

    How To Factory Reset A Laptop

    How to factory reset a Laptop | how to factory reset a hp laptop | how to factory reset a dell laptop | how to reset a laptop to factory settings

    Hello friends,

    When we buy a brand new laptop, then it runs fine for a few months or years, but after that, there are some errors or problem can occur in it. Some of them are minor and some are serious.

    Thats why in some tedious problems, resetting our laptop to be the only option left or if you want to sell your laptop at that time you should reset your laptop.

    Are you facing some tedious problem with your laptop or you want to sell your laptop and want to factory reset it, but dont know how to do that?So, youve come to the right place.

    In this article, I will show you how to factory reset your laptop in the step by step manner. So, stay connected.

    4) All those things go back to the default settings.

    So, to reset your laptop, implement the following steps:

    Way 3 Reset Laptop Without Password Using Recovery Partition

    Computers nowadays usually come with a recovery partition preinstalled, or are shipped with a recovery disc when out of the box, which is used to do a factory reset on your laptop in case system failure happens. However, this may be a little tricky for an old OS version like Windows XP, Windows Vista.

    1.Power on or restart you laptop and hit the corresponding key repeatedly on startup screen. Below we have listed common keys for well-known manufacturers.

    Acer: Alt+F10Sony: F10Toshiba: 0

    2.After that, you will boot into the recovery partition or called Recovery Manager on some PC brands, in which screen you can find specific guidance on how to restore laptop to factory default. Here we take how to factory reset HP laptop without password as an example. Choose System Recovery under I need help immediately.

    3.Follow the instructions to restore your laptop to its original condition and when the reset is completed, restart the PC and decide the initial setup settings.

    You May Like: How To Change Your Keyboard Color On Msi Laptop

    Restore To Factory Settings Guide For Windows Xp Vista 7 8 10

    Factory Settings or Factory Defaults usually refers to performing a restore or a reset of your computer to its original configuration as it first was when it was purchased.

    A restore to factory settings is also known as a reset to factory settings or as a restore to factory defaults.

    Restoring a computer to its factory settings will delete all personal files: music, movies, pictures and any installed software applications or drivers that were not included in the original configuration of that computer.

    Contents

  • 6.2 Applicable Systems
  • Your computer can be restored to its factory settings if any of the following are applicable to you:

    • You have a recovery partition installed on your computer. This partition is usually installed by the PC manufacturer and can be used to restore a computer.
    • You have a set of recovery discs for your computer. These discs usually come with your computer purchase and can be used to perform a restore.
    • You have the original Windows installation disc. This is the original disc that has Windows XP, Vista, 7, 8 or 10. You can use this media to reinstall Windows.

    If none of the above are applicable to you, you still have these options to restore or repair your computer:

    Back Up Windows 10/8/7

    How to Restore a Dell Laptop to factory Settings

    Step 1: After opening your laptop and installing MiniTool ShadowMaker, you can enter an interface to choose to manage the local computer or another computer on the same LAN.

    Step 2: In Backup page, by default, you know MiniTool can choose the system drives used to boot the laptop to back up. .

    Then, click the Destination to choose the storage location for the system image. You had better choose an external hard drive which can be connected to your laptop via USB cable.

    Step 3: Please perform the system backup image operation by hitting Back up Now button. Then you need to wait for a few minutes until the backup operation is completed.

    From the Backup interface, you can see Schedule option which enables you to perform backup task regularly. Four modes are here, including Daily, Weekly,Monthly and On Event. Just choose one.

    Besides, this software offers you Scheme feature, helping create differential backups and incremental backups, as well as disk management when backing up.

    System Restore for Laptop

    In the case of system crash, you can use the system backup created before to restore your laptop to earlier settings.

    How can you do this work with system image? Look at the steps as shown below.

    In order to do a system restore, you are required to create MiniTool ShadowMaker Bootable Edition to do a system restore in WinPE. Here the Media Builder feature enables you to create a bootable CD/DVD or USB drive to boot your laptop.

    Perhaps you are looking for:

    Note:

    Recommended Reading: How To Print Screen On Laptop

    How To Factory Reset Windows 10 And Why You Should

    Image 1 of 7

    Its good practice to factory reset your computer when you sell or dispose of it, regardless of whether its a Mac or Windows PC. It doesnt matter if you use it every day for essential work or just the occasional picture viewing. Your device is bound to have all sorts of personal and sensitive information on it.

    One of the best ways to wipe the hard disk clean is to reset your Windows PC, and if youre running Windows 10, its relatively easy to do. Just be sure to back up your important documents, videos, game saves, images, and other essential data.

    If you need to factory reset your laptop or PC and get it back to its original default settings, this article guides you through the reset process, and it works on any Windows 10 laptop, PC, or tablet.

    Here are some Q & A tidbits you should know before resetting your Windows 10 OS. You can also jump straight to the reset process if desired but do so at your own risk.

    Back Up Important Files

    HP recommends that you back up your files on an external drive or CD/DVD on a regular basis. Scheduled backups can help you recover some, if not all, of your information in the event that something happens to the original files on your computer.

    Factory resetting your computer destroys all the files on the hard drive. If you did not back up your files before running a factory reset, the computer might display a prompt to make a backup copy of your files before the reset performs any action that erases or deletes files.

    For more information on backing up your important files, see HP PCs – Backing Up Your Files.

    You May Like: Best Places To Sell Laptops

    How To Reset Windows 7/vista Dell Laptop Without Administrator Password

    So you want to reset your Windows 7/Vista Dell laptop without an administrator password right? This is achievable

    The first thing is to remove the administrator password. Using another computer, you can access, make a CD remove the password. Now, follow the steps below to do a factory reset:

  • Boot or restart your computer. The second you see the Dell logo appear, begin to press F8 non-stop until you are taken to “Advanced Boot Options”. In this section, choose to “Repair your Computer”
  • Choose an input method for your keyboard, then click “Next”
  • Select your administrator account under “User name”. For the “Password” box, do not input anything since you have removed the password initially. Now select “OK”
  • Select the option “Dell DataSafe Reduction and Emergency Backup” from the tab “System Recovery Option”. From here, follow the instructions on the screen till you complete the reset.
  • Restart your computer once the factory reset is complete.
  • Running System Restore From Safe Mode

    How to Restore Your Laptop to Factory Settings on PC or Mac

    One of the most accessible options is to go through Safe Mode. The user does not need the Windows Vista installation CD to proceed with this method. Everything can be handled through the easy-to-use Windows interface. However, its important to note that System Restore will not be available if the option was previously disabled.

    Run system restore:

    • Boot up the PC.
    • Before the Windows logo comes onscreen, push F8 and hold it until the Advanced Boot Options menu appears.
    • Select Safe Mode with Command Prompt and hit Enter.
    • In the command prompt, enter rstrui.exe and hit Enter.
    • If required, type in the administrator password.
    • Follow the guidelines and finish the restore!

    You May Like: How To Turn On Wireless Capability On A Dell Laptop

    More articles

    Popular Articles

    How To Add Vpn To My Laptop

    How To Get Vpn On Hp Laptop