Why Is My Laptop Suddenly Very Slow
One of the most common reasons for laptop suddenly becomes very slow are programs running in the background. You can try to close any TSRs and startup programs that automatically start each time the computer boots. To see what programs are running in the background and how much memory and CPU they are using, open Task Manager, click Performance and Memory.
Identify Programs That Slow Down Your Computer
If you have programs that use a lot of memory, you need to decide if theyre worth the resources theyre using. These could be high-level apps, items that start automatically that you dont use, or a program you opened previously and have forgotten about. Removing these programs can help speed up a computer.
Solution 7 Increase The Capacity Of Ram
When your laptop has too little RAM, your ASUS laptop cannot support too many applications to run smoothly, and it will run very slowly. In this case, installing a new RAM chip to increase the RAM capacity is quite effective for improving the performance of the laptop. Especially for those who use an ASUS laptop for gaming or video/photo editing, adding extra RAM is a smart way to speed it up.
To see the specific condition of your RAM, In Task Manager, click “Performance” and “Memory”.
Also Check: How To Clean Hp Laptop Screen
Solution 5 Fix Windows System Issue To Solve Asus Laptop Slow
There are many potential problems in Windows 10 that may be related to ASUS laptop running slow matter, for instance, malware attack mentioned before, registry errors, invalid system disk errors, computer lagging issues, and more.
If your ASUS laptop runs very slow for no good reason, you can do a diagnose, check the file system error, and repair bad sectors on the hard drive and. Also, you need to do disk optimization to defrag partition use EaseUS partition manager software. To resolve Windows registry errors or other Windows system issues, you can apply CCleaner for help.
How To Fix A Slow Running Computer
When your sytem begins to slow down, and unresponsiveness and long load times become the norm, whats the best way to speed up a computer? Fixing computer lag problems can seem like a daunting proposition, but its not. Our guide will show you how to fix a slow PC, with steps that can be done in minutes and instantly deliver lasting results.
Recommended Reading: How To Connect Airpods To My Laptop
Too Many Apps Open Automatically When Pc Starts
Almost every program you download on your computer will come with a prompt requesting for permission to run when your PC starts, known as startup programs. This is how a lot of apps and programs on your computer end up automatically loading and running in the background as soon as you turn your PC on. This overload is what makes your computer slow right from the booting process.
Install Latest Windows 10 Updates
Another obvious fix that you should attempt to try is to update your Windows 10 with the latest updates. This might include important driver updates and cumulative updates. To check for updates,
- Go to Settings > Updates & Security.
Windows will now check for updates and install them automatically.
Also, issues can also arise during the updating process are when the update files are corrupt and get piled up. So the best thing that you could do to start over and save some storage space in the process.
Don’t Miss: How To Hard Reset Hp Laptop Without Password
How To Find Startup Programs
Regardless of whether youre using Windows 10, 8.1, or 7, youll find that the startup programs are listed in your Task Manager.
You can get to the Task Manager by simultaneously hitting in ctrl+alt+del and selecting the Task Manager from the menu or typing in task manager in the Windows search bar.
From there, youll click on the Startup tab.
You will now see a list of programs automatically set to start when you turn on Windows.
Windows will let you know what kind of impact each program has on the startup process. Levels are indicated by high,low, or none. Some programs are marked with not measured. There are several reasons why a programs impact might not be measured, including if it was so recently installed that Windows hasnt had a chance to actually measure it yet. That said, you can find some solutions to fix that problem over at Stack Overflow.
For Windows 10 users, youll find that programs with multiple installed subprograms are listed as a group. You can hit the name of that application to bring up the full list.
You can see the current on-startup loading status of the application , and the applications publisher .
Check Your Web Browser And Internet Connection
If you notice that your computer is running slowly, check to make sure that you have the most recent version of your web browser. Although where the information varies by browser, there will be an About selection to show you the version number. If there is an option to install new versions automatically, enable it. Having too many add-ons and extensions can also slow your web browsing. Again, it depends on your browser, but you should be able to find a menu called Add-ons or Extensions that will allow you to delete any that you dont want.
You May Like: Where Can I Sell My Used Laptop
Keeping Things Running Smoothly
Once youve cleaned up your computer by implementing some of the tips above, no doubt youll want to keep it running at top speed. To avoid getting frustrated with lackluster performance, its a good idea to schedule a monthly cleanup. Use the above list of tips as a handy checklist and youre all set.
Guide To Fixing Slow Startup
Just like most of Windows 10s errors and issues, there are multiple reasons why your computer may be starting up slower than it should. This also means that the problem can be fixed in a number of different ways.
Below are the methods people have found to be useful to improve the boot time of their devices. Wed like to recommend that you use these methods in conjunction with each other this is going to ensure that you make your computer boot time as fast as possible.
Recommended Reading: How To Connect Airpods To My Laptop
Remove Or Disable Background Programs
Your computer may be slow because too many programs are running at the same time. Weve grazed this topic previously, but RAM and the swap file arent the only concerns here.
Multiple running programs will eat up a computers processing power, and this affects your devices memory and performance. Of course, this is how a computer is designed, so it should handle a couple of programs open at once. However, the problem of slow-downs gets exacerbated when you have background programs running as well.
Hence, disabling background programs is one of the best ways to keep your computer running quickly. While some of these programs can be beneficial for some workflows, its important to shave off unnecessary ones to speed things up.
If youre unsure which background programs are running, theres a quick way to check on Windows 10. Just open the Task Manager by pressing Ctrl+Alt+Del on your keyboard. By default, the Task Manager will open in a simplified way without details. However, you can expand this by clicking on the More details link at the bottom.
Doing that should help you find the background programs running and how much power and memory each one consumes. You can click on the various headers to sort the programs by how much they eat up in each category. Afterward, hit End task on unnecessary programs that eat up a lot of resources. Be cautious while youre doing this as you dont want to disable programs important to your OS.
Check For Low Disk Space And Free Up Space
You may improve performance if you free some disk space on your PC.
To check for low disk space
Select the Start button, then select Settings > System > Storage .
Your drives will be listed in the Storage area. Note the amount of free space and total size for each drive.
Note: If your PC is not low on space, try the next tip.
You can use Storage Sense to delete unnecessary or temporary files from your device, which can also free up space.
If you turn on Storage Sense, Windows will automatically free up space by getting rid of unnecessary filesincluding files in your recycle binwhen you’re low on disk space or at intervals you specify. The instructions below show you how to delete temporary files and how to turn on and configure Storage Sense.
If you can’t find Storage Sense on your device using the following steps, see the “Free up space with Disk cleanup” section below instead.
Note: You may not want to delete temporary files to improve performance. While these files may not be used at the moment, they help your apps load and run faster.
To delete temporary files with Storage Sense
Select the Start button, then select Settings > System > Storage .Open Storage settings
Select Temporary files in the storage breakdown. Note: If you don’t see Temporary files listed, select Show more categories.
Windows will take a few moments to determine what files and apps are taking up the most space on your PC.
Select the items you want to delete, and then select Remove files.
Read Also: Where Can I Sell My Used Laptop
Use Onedrive Files On
Some users may not want to stop OneDrive from syncing doing so defeats its purpose of making sure you have the latest files on whatever device you use. And it would also mean you wont be able to use OneDrive as a way to safely back up files.
But theres a way to get the best of both worlds: You can keep syncing to an absolute minimum and only do it when absolutely necessary. Youll speed up performance, and still get the best of what OneDrive has to offer.
To do this, you use Windows OneDrive Files on-Demand feature. With it, you can choose to keep only certain files on your PC, but still have access to all your other OneDrive files in the cloud. When you want to use one of those online files, you open it directly from the cloud. With fewer files on your PC sync, you should see a performance boost.
Right-click the OneDrive icon on the right side of the Taskbar and select Settings, then click the Settings tab on the dialog box that appears. Check the box next to Files On-Demand. Now click the OneDrive icon and select Open Folder. OneDrive appears in a File Explorer window. Right-click a folder whose files you want stored only in the cloud, but not on your PC, then select Free up space. Files from that folder will be removed from your disk, but still kept in OneDrive in the cloud.
Use this dialog box to turn on OneDrive Files on-Demand
Note that OneDrive Files on-Demand is available only on Windows Version 1709 and higher.
Fix 1 Disable Fast Startup
Fast Startup is enabled by default in Windows 10. It is supposed to reduce startup time by pre-loading some boot information before your HP PC shuts off. It works in a similar manner to Hibernation. But in fact, as many users reported, it’s been causing issues.
Step 1. Type power option in the search box from Start, then click “Power & Sleep settings”.
Step 2. Click “Choose what the power buttons do”.
Step 3. Click “Change settings that are currently unavailable”.
Step 4. Untick Turn on fast startup . Then click “Save Changes”.
Step 5. Reboot your HP computer and check to see if it boots quickly.
Also Check: How Do I Stop Pop Ups On My Laptop
Change Your Power Settings
If youre using Windows 10s Power saver plan, youre slowing down your PC. That plan reduces your PCs performance in order to save energy. Changing your power plan from Power saver to High performance or Balanced will give you an instant performance boost.
To do it, launch the Control Panel app, then select Hardware and Sound > Power Options. Youll typically see two options: Balanced and Power saver.” To see the High performance setting, click the down arrow by Show additional plans.
Change your power settings in Control Panel to give your PC a performance boost.
To change your power setting, simply choose the one you want, then exit Control Panel. High performance gives you the most oomph, but uses the most power Balanced finds a happy medium between power use and better performance and Power saver does everything it can to give you as much battery life as possible. Desktop users have no reason to choose Power saver, and even laptop users should consider the Balanced option when unplugged and High performance when connected to a power source.
Removing A Tsr In Windows 2000 To Windows 7
Press and hold Delete, then click the Task Manager option. Or if you’re running Windows XP, it should immediately open the Windows Task Manager window. In Task Manager, click the Applicationstab, select the program that you want to end, and click the End Task button.
As shown in the picture above, the Applications window only displays programs that are currently open and visible to the user. Other TSRs and Windows Processes are shown in the Processes tab. Clicking the Processes tab displays each of the processes running and the system resources they’re using, as shown below.
We recommend you only click End Process for programs you know. If you are unsure what a process is, searching for the name of the file returns the results of each process.
You cannot End Task any of the systems processes.
Don’t Miss: Is Razer Laptop Worth It
Disable Windows 10 Automatic Maintenance
This Windows 10 slow startup fix might be unheard of for most users. The reason being this has not been widely reported to be an issue. But for users facing the slow spinning dots when restarting or booting up Windows 10, this might just be the fix that you may be searching for. With some of the tests that I attempted, Automatic Maintenance in Windows 10 leads issues resulting in the dreaded spinning dots for ages. This is especially true for PC and Laptops with Dual graphics cards.
If you want to give this peculiar fix a try,
- Launch the registry editor by typing regedit in the search box or Run.
- Navigate to the following Key:
- In the right pane, there will be a 32-Bit DWORD value of the name MaintenanceDisabled. In case if there is no such value, create it yourself by right-clicking on the blank space in the right pane, then New > DWORD value.
- Note that irrespective of your CPU architect, still a 32-bit keyword is required.
- Now double click the key to see its value. Set the value to 1 to disable Automatic maintenance in Windows 10.
Thats it, and your Automatic Maintenance in Windows 10 is now disabled.
However, if you find this fix not working for you or if you would like to re-enable the feature, just delete the key or set the value to 0.
Solution 4 Disable Unnecessary Services
There are various services on your computer. Some of them are essential, and some are unnecessary. So, in order to fix computer running slow Windows 10 problem, try to disable unnecessary services to improve Windows 10 performance.
Now, here is the tutorial.
After that, reboot your computer and check whether the Windows 10 very slow and unresponsive issue is fixed.
Recommended Reading: Msi Keyboard Color Change
Adjust The Appearance And Performance Of Windows
Windows 10 includes many visual effects, such as animations and shadow effects. These look great, but they can also use additional system resources and can slow down your PC. This is especially true if you have a PC with a smaller amount of memory .
To adjust the visual effects in Windows
In the search box on the taskbar, type performance, then select Adjust the appearance and performance of Windows in the list of results.
On the Visual Effects tab, select Adjust for best performance> Apply.
Restart your PC and see if that speeds up your PC.
If your PC still runs slowly, continue to the next tip.
Permanently Disable Tsrs In Microsoft Windows 95
Also Check: Connect Airpod To Laptop
Why Is Windows 10 Suddenly So Slow
One of the most common reasons for a slow computer is programs running in the background. Remove or disable any TSRs and startup programs that automatically start each time the computer boots. To see what programs are running in the background and how much memory and CPU they are using: Open Task Manager.
Permanently Disable Tsrs In Microsoft Windows 8 And 10
You May Like: How To Setup My Hp Printer To My Laptop