Thursday, September 29, 2022

Windows Laptop Wont Turn On

Don't Miss

Drain The Computer Of Electricity

Laptop won’t turn on but the power light is on Fix

Sometimes, a residual electrical charge can keep your laptop from turning on. You can think of it as an “electricity clog.” By performing the following steps, you effectively drain your laptop of any electricity and start over, which often results in it powering up.

  • Disconnect the AC adapter and remove the battery .
  • Hold down the power button for thirty seconds to drain any residual power from the laptop.
  • Without replacing the battery, plug the AC adapter back into the laptop.
  • If your laptop’s battery is not removable, still plug in the AC adapter.

  • Press the power button to turn on your laptop and verify that it boots correctly.
  • If the laptop powers on, shut down the laptop normally.
  • If you were able to remove the laptop battery, put the battery back in the laptop.
  • Power on the laptop again, and verify that it boots correctly.
  • If this process does not work for you, repeat and hold the power button for one minute or longer at step two.

    Restore Your Computer To Previous Settings

    If you have restore points set up on your PC, you may be able to roll back your computer’s settings to a time before your issues started. Here’s how:

  • Repeat steps 1â6 from above to enter the Windows Recovery Environment.
  • On the Choose an option screen, select Troubleshoot > Advanced options > System Restore.
  • Select a restore point from a time when your PC was working properly and click Restore.
  • Run A Diagnostic Test

    Dell ships all modern laptops with an integrated diagnostic test which can point you toward the root cause of major problems. To run it, press the power button and press F12 repeatedly when the Dell logo appears. After a few seconds, you should see the BIOS boot screen. Use the trackpad or arrow keys to choose Diagnostics and run the test. It will take a few minutes for the test to complete, and make a note of any issues that the test identifies.

    Read Also: How To Access Laptop Remotely

    Check Ac Adapter And Power Port For A Bent Pin

    Some AC adapters have a pin in the end of the adapter that plugs into the laptop. Examine the adapter’s connector that plugs into the laptop and check if there is a bent or broken pin. If there is, the laptop is not receiving any power from the AC adapter. To fix the problem, the AC adapter needs to be replaced.

    Some laptops have a pin inside the power port that helps make a solid connection to the AC adapter. If the pin is bent or broken, the laptop is not receiving any power. To fix the problem, the power port on the laptop needs to be repaired or replaced. However, depending on the type of laptop, this solution may demand a full motherboard replacement.

    Computer Stops Or Reboot On Blue Screen Of Death

    laptop won

    Sometimes, your computer will start but will reboot or hang on a blue screen. This screen is also dubbed as blue screen of death. At such times, when your computer not powering on, you need to follow the given below steps.

    Step 1: The blue screen of death might be caused due to a new program or software that was installed recently. At such times you need to perform a system restore. Ask for a professional to help out.

    Step 2: You can also roll back the device driver to an earlier version when the error was not present. This will also need professional to help you out.

    Step 3: Blue screen of death also occurs when there is not enough space on the drive. You need to make sure that there is enough memory on the drive where the Windows is installed. This might help you is your computer won’t turn on blue screen.

    Don’t Miss: What’s A Good Laptop For A College Student

    How To Unlink Your Onedrive Account

    If you unlink your OneDrive account, the app won’t be able to sync your files anymore. To unlink your account, repeat the following steps.

  • Open the OneDrive app from the system tray icon. Click on the gear icon and then click on the Settings option.
  • Find the Unlink this PC option present under the Accounts tab.
  • Follow the on-screen prompts to unlink your account and close the Window.
  • Windows 10 Laptop Wont Turn On/start Here 5 Solutions To Fix It 2022

    If you are ready to start your day at work, but when you press the power button on your laptop, then nothing happens. And, this is the indication that you wont be able to accomplish anything today. Now, no need to get flustered if your laptop wont turn on as it is a very common problem and it is very easy to fix the laptop wont turn on.

    Your laptop wont be working due to many reasons and you just need to identify the root cause of the problem before fixing your laptop switch on the problem. However, we have created the list of the few first aid instructions that you can try to rescue your laptop immediately.

    Read Also: How To Record A Video From My Laptop

    Computer Powers On And Then Off

    Follow these steps if, when you turn your computer on, it promptly powers back off. You might hear the fans inside your computer turn on, see some or all of the lights on your device turn on or flash, and then it will all stop.

    You won’t see anything on the screen, and you may or may not hear beeps, called beep codes, coming from the computer before it shuts off by itself.

    Like in the previous scenario, don’t worry about the state your external monitor is in, if you have one. You may have a monitor problem as well but it’s not possible to know that quite yet.

    Windows Reboots After Login Screen

    HP Laptop Won’t Turn On SOLUTION!

    If you are one of the users that are complaining “my computer won’t start” because your PC is rebooting after login screen, then you can try out this solution. At such cases, the user logs-in to the computer but the device keeps on rebooting every time you enter the password.

    Step 1: If you are facing the issue, you can login to the device in the safe mode. This issue can be sometimes caused due to failed update. Hence logging in with safe mode might help.

    Step 2: Check if any viruses are present on your device. You need to use a good antivirus tool in order to clean your PC and get rid of any virus.

    Step 3: Replace the battery of your computer if it more than 3 years old. A damaged battery might also be the reason for this issue.

    Read Also: What Laptop Should I Get For Video Editing

    Find And Push The Power Button

    The first step to powering up your PC sounds really obvious: Find and push the power button. But its not always obvious which button it is.

    On desktop PCs, the power button is usually larger than other buttons on the device, and it will usually have the international standard symbol for a power button on or beside it. That symbol is a circle with a vertical line passing through its top portion, and it represents the binary concept of 1 and 0 for on and off.

    On many all-in one desktop PCs , the power button might be on the side edge of back side of the display, possibly near where the power cord plugs into the unit.

    On laptop and tablet PCs, the power button can be anywhereon the surface near a keyboard, a key on the keyboard itself, on a side edge, or on the back. In this case, its best to look in your devices manual for assistance in locating the right button.

    Once you find the power button, try pushing it once. If the PC wont turn on, hold your finger down on the button for about 3-5 seconds and see if the computer powers on. If not, youll need to follow some other troubleshooting steps in the sections below.

    Start Your Pc In Safe Mode

    If your computer turns on but won’t load Windowsâ¢, you can try starting it in safe mode. This only loads a limited number of programs, making it easier to identify your problem.

    To use safe mode in Windows 10, you need to enter the Windows Recovery Environment, a companion operating system that allows you to troubleshoot common startup issues. This can be a bit tricky, so follow these steps closely:

  • Hold down the power button for 10 seconds to turn off your computer.
  • Press the power button again to turn it on.
  • When you see Windows trying to start, hold down the power button until your device turns off.
  • Press the power button again to turn it on.
  • Repeat steps 3 and 4. Allow your device to fully restart and you will be in the Windows Recovery Environment.
  • On the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.
  • Once your computer restarts, you’ll see a list of options. Select Safe Mode with Networking.
  • When you are in Windows, try uninstalling any apps or programs you recently added or updated to see if they are causing the issue.
  • Recommended Reading: How To Write A Book On Your Laptop

    Check The Charger Connection

    Charging Port

    To get to the bottom of the cause, you need to look at every aspect that goes into charging. First of all, check whether the charging cable is firmly plugged into your laptop. Even if it looks like it is, go ahead and push it in and see if that helps. If that doesnt work, you want to inspect your laptops charging port a bit more closely. Its possible that it has accumulated dust internally, so give it a gentle wipe with a cotton swab or a microfiber cloth.

    You should also look for the light on your laptop that turns on when you plug in the charger, if you see that it is working then you know that the charging port is functional. There is also a strong possibility that internal parts inside the port have malfunctioned or loosened up, if this is the case, a repair is in order. It might not be as much work as you think, though. We have a guide with several ways to fix your power jack without soldering.

    If the charger is not working and you dont have a spare charger, we have guides to charging your windows laptop without a charger, and also your chromebook.

    Power Outlet

    Also Read: How Many Watts Does it Take to Charge a Laptop

    Damaged Charger

    Faulty Power Button

    Maybe the Power button itself is not working. To test this, try turning the laptop on without the power button.

    If you do not find any abnormalities and all is well with the charging port, charger, power button and the wall socket, then proceed to the next step.

    Check If Any Hardware Is Malfunctioning

    why my computer won

    Hardware malfunction can also be the source of the problem. For instance, if your laptop responds to the power button but gives nothing on the screen, you can try hooking up another monitor. If the other monitor works, your laptops screen is broken. You can then replace it or fix it with the help of a professional.

    Additionally, if your laptop heats up as soon as you hit the power button and then turn off automatically, your fans might not be working. Such a case also does not let your laptop turn on. So, it is best to take your laptop to a professional and have it diagnosed for faulty hardware and change it.

      There is a chance that your laptops CMOS battery is dead or not working properly. Usually, the CMOS battery lets your laptop store BIOS settings and other useful information on your PC.
      You can try changing the CMOS battery and turning on the laptop. If it works, you will not have to worry about the problem again.

    Don’t Miss: How Much Is A Used Asus Laptop Worth

    Safe Mode With A Windows 10 Recovery Drive

    If you cannot enter Safe mode, you will need to create a Windows 10 USB recovery drive. The recovery drive contains the Windows 10 recovery environmentwhich used to be accessible by tapping F8 on boot. Unfortunately, Microsoft decided to eliminate this feature.

    Creating a recovery drive requires another Windows 10 computer and a USB drive with at least 512MB of storage. If you want to create a system backup , you’ll need 16GB of storage.

    Launch Control Panel > Create a recovery drive.

    Then follow the guided instructions.

    After creating the recovery drive, you can boot your computer from it only if you’ve turned on USB drives as bootable from the POST environment, also known as UEFI or BIOS. After enabling USB drives as bootable, insert the drive into your computer and restart .

    Watch Out For Overheating

    Most laptop processors have internal thermal protection that shuts down the computer. The laptop won’t start again until the system cools down. If you’re using the computer on a bed, pillow or other soft surface, make sure the computer’s vents aren’t blocked and that the hot air is being displaced correctly. A laptop that isn’t venting correctly could have a faulty fan that needs to replaced. If your laptop is hot to the touch, let it cool down completely before trying to turn it back on. A laptop that turns back on once its cooled down most likely has a problem with overheating.

    Also Check: How Connect Laptop To Monitor

    Test The Components Of Windows 10 Hp Laptop

    A faulty component is one of the reasons why HP laptops wont power on in Windows 10. Multiple components might be installed on your laptop. The device may fail to start if one or more components contain a problem.

    One way to find out about these flaws is to test the components. You can turn your HP laptop on and off. Go to the menu and select Component Tests to perform the necessary tests.

    • Check to see if the device has been turned off.
    • Restart it and press Esc.
    • Keep pressing Esc until you see a menu appear.
    • When the menu appears, press the F2 key.
    • Select Component Tests from the drop-down menu.
    • You may learn about every component of the gadget by using the sub-menu.
    • The components must be tested to guarantee that they are free of flaws.
    • If any problems are discovered, contacting HPs support team is recommended.
    • Check if the hp laptop wont turn on is solved or not.

    Remove All External Devices

    How to Fix Windows Wifi Wont Turn ON – ( SOLVED) 100% Fix

    There are instances where external devices such as a USB, external mouse, keyboard, etc., interfere with your laptop and stop it from turning on. You can try removing all of them and try again. You can plug the devices again after your laptop boots up if it turns on. You can then troubleshoot such devices and figure out why they caused problems.

    Don’t Miss: What Is The Best Hp Laptop To Buy

    Windows Crashes During Startup

    If the Windows is crashing during startup. There could be issues with a particular Windows build or drivers on the laptop. Heres how you can fix it:

    How to fix

    Check if you can boot into safe mode without any issues, if are able to enter into safe mode then a particular Windows update patch could be causing the issues. To uninstall the recently installed Windows update patches enter into Advanced options by following the above method and then clicking Uninstall updates.

    And if you were somehow able to access the Windows update screen then Heres how you can uninstall Windows updates:

    • Go to the Settings app
    • Then go to Windows Update.
    • Click Update history.
    • Scroll down and click Uninstall updates.
    • On the next screen, youll get the list of updates.
    • Select the desired update patch and Uninstall.

    To check if there are issues with the drivers you can follow the same safe startup option. If the Windows boots properly into safe mode then there are issues with the laptop drivers. In this case, try updating to the latest available drivers from the manufacturer to see if it fixes the issues.

    Microsoft Surface Pro Laptop

    Here is the scenario: We have had arctic temperatures here in the mid-west for the past couple of weeks. Yesterday, on the way home from work, we made a stop and had several bags of stuff to carry in with us. Consequently, we accidentally left one of our Surface tablets in the car overnight. And the temperatures dropped to -15 F!

    Since we have two Surfaces, we did not notice that one was missing.

    So, guess what happened? Yep, the Surface froze and wont turn on.

    We brought it inside in the morning and let it warm up for several hours, but it still wouldnt start. So, we figured the battery must be drained and plugged it in for an hour. The Surface RT still would not start.

    So, at this point we had two things to try, one of which is not recommended for Surface RT/2.

    Your Surface Wont Start, Method 1:

  • Make sure that the Power Supply is attached to the device.
  • Press and hold the Power button for 10 seconds.
  • Repeatedly press and hold the Power button for 1/2 second before letting go .
  • Wait a few seconds to see if the Surface begins running and screen turns on.
  • If it does not, repeat the process.
  • This is the preferred method but it still did not start our Surface RT.

    Your Surface Wont Start, Method 2:

    Important: Microsoft says to NOT use this process on a Surface RT or Surface 2. But obviously our Surface RT already seemed dead, so we were willing to give it a shot.

  • Always make sure the Surface is turned off first â not a problem in our case.
  • Turn on the Surface as usual.
  • You May Like: How To Record Screen On Laptop With Audio

    More articles

    Popular Articles

    How To Get Vpn On Hp Laptop

    How To Add Vpn To My Laptop